Aquascape Aquajet 600 (g2) Water Chamber Cover Kit
AQ-91088
Replace the Water Chamber Cover on Your AquaJet 600 Pump
The Aquascape AquaJet 600 (G2) Water Chamber Cover Kit is a factory replacement water chamber cover and associated O-ring for second-generation AquaJet 600 submersible pumps. The water chamber cover is a wear item in this compact pump series; replacing it promptly when damaged prevents reduced output and moisture ingress toward the motor section.
Affordable Maintenance for the Entry-Level AquaJet
The AquaJet 600 is one of Aquascape's most widely used small pond pumps, found in tabletop fountains, decorative spitters, and compact water features. Its modest size means internal components are closely toleranced and even a small crack or deformed O-ring on the water chamber cover noticeably reduces flow. This kit provides the correct G2-specification cover at a fraction of the cost of a replacement pump.
| Specification | Value |
|---|---|
| Compatible Pump | Aquascape AquaJet 600 (G2) |
| Component | Water chamber cover with O-ring |
| Fit Type | OEM direct replacement |
How to Use
Remove the AquaJet 600 from the water and unplug. Open the pump casing to expose the water chamber cover. Remove the worn cover and existing O-ring. Ensure the O-ring channel in the pump body is clean and free of debris. Seat the new O-ring evenly, then press the replacement cover onto the pump body until all retention points engage. Test in a container of water before reinstalling in the feature. Inspect the water chamber cover annually at the start of each operating season.
Ideal for AquaJet 600 G2 pumps powering tabletop fountains, decorative animal spitters, small container ponds, and compact fountain heads.