Oase Filtral 1200 Impeller
OASP-44091
Restore Flow to Your Filtral 1200 Filter-Pump
The Oase Filtral 1200 impeller is the internal rotor that circulates water through the foam media and out through the fountain nozzle. A worn, chipped, or mineral-encrusted impeller causes reduced flow, weak fountain displays, and inadequate filtration. Replacing it restores the unit to its rated performance.
Quick Swap, Immediate Results
The Filtral 1200's impeller sits on a ceramic shaft inside the pump chamber. Removing the old impeller and pressing on the new one takes under five minutes. Because the impeller is the only moving part, it is the first component to inspect when performance drops — and usually the cheapest fix.
| Specification | Details |
|---|---|
| Compatible Model | Filtral 1200 |
| Type | OEM replacement impeller |
Installation
Disconnect the Filtral from power and lift it from the pond. Open the pump compartment, slide the worn impeller off the ceramic shaft, and press the new one on until it seats. Reassemble, submerge, and reconnect power. The improved flow should be immediately noticeable at the fountain nozzle.
Ideal for Filtral 1200 owners experiencing weak water flow or a barely visible fountain display despite clean filter foam.